Setting up your own Bed Switch

You might have always wished that after that late night movie you could have turned off your lights without getting off your bed. In this post I would teach you how to make your own Bed Switch.

Procedure -

1. Open your CFL/Tubelight/Bulb holder.
2. Turn on the Switch & use a Tester to trace your Live & Neutral wires. n my case the Yellow wire was Live & is shown in the screenshot below.
3. Now turn off your Switch & remove the Live wire from the holder socket.
4. Get hold of a long wire pair (depending upon where you want to keep your Switch) & attach a Bed Switch at one end.
5. At the other end, fix one wire to the point from where you had detached the Live wire from the holder & the other wire should be twisted with the detached Live wire & sealed using an insulation tape.
6. Fix the holder back to the proper place.

Your Bed Switch should now be ready. To make best use of it always keep the main Switch from the Switchboard on & operate the room lighting from the Bed Switch itself.

Find it simple & interesting. Why dont you try out yourself.